Standards and function ports IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3x flow control for full-duplex mode Compliance with IEEE 802.3af Compliance with IEEE 802.3at Auto-negotiation Number of Ports 24-port 10/100/1000 Mbit / s, with the function of PoE, 4 SFP ports Network Cables UTP category 5, 5e (max. 100 m) EIA/TIA-568 100-ohm STP (max. 100 m) Full / half duplex Full / half duplex for 10/100 Mbit / s Full duplex for Gigabit speed Media Interface Automatic and customizable interface MDI / MDI-X Throughput of the switch 56 Gbit / s Switching Method Store-and-forward Table MAC-addresses 16,000 entries per device Study of MAC-addresses Up to 256 static MAC-address records Enable / disable auto-learning of MAC-addresses The maximum packet forwarding rate of 64 bytes 41.7 Mpps Packet buffer memory 1 MB on the device PoE The standard for PoE: 802.3af and 802.3at Functions of Port PoE: ports 1 to 4: up to 30 W, ports 5 to 24: up to 15.4 W Power PoE: max. 185 W Software Layer 2 Features Table of MAC-addresses: 16,000 records Flow Control - 802.3x Flow Control - HOL blocking prevention IGMP Snooping - IGMP v1/v2 Snooping - Supports up to 256 IGMP-groups - Support for up to 64 static multicast groups - IGMP on VLAN - Supports IGMP Snooping Querier Spanning Tree Protocol - 802.1D STP - 802.1w RSTP Loopback Detection 802.3ad Link Aggregation - Max. the number of groups on the device 14/8 ports per group Port Mirroring - One-to-One, Many-to-One - Supports Mirroring for Tx / Rx / Both Filtering Multicast - Redirect all unregistered groups - Filters all unregistered groups LLDP, LLDP-MED VLAN 802.1Q Group VLAN - Max. 256 static VLAN groups - Max. VID 4094 Management VLAN Asymmetric VLAN Auto Voice VLAN - Max. 10 user defined OUI - Max. 8 default specific OUI Auto Surveillance VLAN QoS (Quality of Service) 802.1p Quality of Service 4 queues per port Processing Queues - Strict - Weighted Round Robin (WRR) CoS based - 802.1p Priority Queues - DSCP - ToS1 Bandwidth Management - Port-based (Ingress / Egress, with a step up to 10/100/1000 64 Kb / s) Access Control Lists (ACL) DGS-1210-28P: - 50 profiles (maximum) - Max. 240 Access Rules - Individual port or multiple ports (each rule) ACL on the basis of - MAC-addresses - IPv4-address (ICMP / IGMP / TCP / UDP) - 802.1p - DSCP - The type of Ethernet Actions ACL - Allow - Deny Safety Port Security - Supports up to 64 MAC-addresses per port Management of broadcast / multicast / unicast storm Static MAC-address D-Link Safeguard Engine The DHCP Server Screening A trusted host Prevent ARP Spoofing Attacks - Max. 64 records SSL - Support v1/v2/v3 - Support IPv4/IPv61 Segmenting traffic Intelligent binding - Supports 512 entries bindings IP-MAC-Port - Detection of connected devices and their binding - Inspection ARP-packets and / or IP-packet - Support for DHCP Snooping AAA Authentication 802.1X port-based - Support for RADIUS-server - Support for EAP, OTP, TLS, TTLS, PEAP OAM Cable Diagnostics Return to factory settings MIB 1213 MIB II 1493 Bridge MIB 1907 SNMP v2 MIB 1215 Trap Convention MIB 2233 Interface Group MIB D-Link Private MIB Power-Ethernet MIB LLDP MIB Compliance with RFC RFC 783 TFTP RFC 854 Telnet-server RFC 951 BootP / DHCP-Client RFC 1157 SNMP v1, v2, v3 RFC 1191 Path MTU Discovery FC 1213 MIB II, IF MIB RFC 1215 MIB Traps Convention RFC 1350 TFTP RFC 1493 Bridge MIB RFC 1542 BootP / DHCP-Client RFC 1769 SNTP RFC 1901 SNMP v1, v2, v3 RFC 1907 SNMP v2 MIB RFC 1908 SNMP v1, v2, v3 RFC 2068 FCS RFC 2131 BootP / DHCP-Client RFC 2138 RADIUS Authentication RFC 2139 RADIUS Authentication RFC 2233 Interface Group MIB RFC 2246 SSL RFC 2475 RFC 2570 SNMP v1, v2, v3 RFC 2575 SNMP v1, v2, v3 RFC 2598 CoS RFC 2616 FCS RFC 2618 RADIUS Authentication RFC 2819 RMON v1 RFC 2865 RADIUS Authentication RFC 3164 System Log RFC 3195 System Log RFC 3411-17 SNMP RFC 3621 Power Ethernet MIB Management Multilingual Web-based GUI - English (the default) - Simplified Chinese - Traditional Chinese - French - German - Italian - Japanese - Portuguese - Russian - Spanish The SmartConsole Simplified CLI Telnet-server TFTP-client Customizable Interface MDI / MDIX SNMP - Support v1/v2/v3 SNMP Trap The system log - Max. 500 log entries BootP / DHCP-Client SNTP ICMPv61 IPv4/IPv6 Dual Stack1 Automatic configuration of DHCP RMONv1 PoE on the basis of time (only model PoE) Technology D-Link Green 3.0 Energy savings: - In various states of connection - Depending on the length of the cable - When you turn indicators or ports - In standby ports - In sleep mode, the system πϊεπιν τιζιινPower Input 100-240 VAC, 50/60 Hz internal universal power supply The maximum power consumption 238.4 W (PoE enabled), 27.4 W (PoE off) Power consumption in standby mode Vt/110 16 V, 14 Vt/240 In Number of fans 3 intelligent fan acoustics 52.2 dB heat release 813,42 BTU / hr operating temperature -5 ° to 50 ° C storage temperature -20 ° to 70 ° C Operating Humidity From 0% to 95% non-condensing humidity From 0% to 95% non-condensing Dimensions (L x W x H) 440 mm x 250 mm x 44 mm The size for installation in a standard 19-inch rack, 1U height weight 3.7 kg diagnostic Lights Power (per device) PoE Max (per device) Link / Activity / Speed (per port 10/100/1000 Mbit / s) Link / Activity / Speed (Per Port SFP) Fan (per device) The button will toggle the display between the PoE LED Link / Activity MTBF 224.530 h Certifications FCC Class A CE Class A ICES-003 VCCI Class A C-Tick BSMI safety cUL CE LVD |