 |
| Optimized the angle with honeycomb fin, helps to increase the airflow , minimize the noise. | |
| Down blowing type design
Through emitting the air straight from the fan to the mother board,
it cools down not only the CPU but also the components around it.. | |
|
| One of the Advanced Sleeve bearing FSB Fluid Shield Bearing) applied to prevent
dust and strong cooling performance with 92mm fan with minimized noise. | |
| Shark fin blade helps to reduce the turbulence generated
while the turning of the fan, which helps to reduce noise
and vibration, at the same time increases the air flow. | |
| 60mm high, small enough to mount into LP(Low Profile) case,
perfect for home theater PC, with weight only 240g. | |
| Wide compatibility and easy installation. | |
 |
|
 | | |  | Socket | | CPU | | CPU Compatibility | |
| Intel | 1155/1156 | Core i7 | Supports all speeds | | Core i5 | | Core i3 | | 1150 | Core i7 | Supports all speeds | | Core i5 | | 775 | Core 2 Quad | Supports all speeds | | Core 2 Duo | | Pentium Dual Core | | Pentium D | | Pentium 4 | Prescott | 95W or lower | | Cedar Mill | 95W or lower | | Celeron D | Supports all speeds | | AMD | FM1 | Llano | 95W or lower | | FM2 | Trinity | 95W or lower | | AM3 | Vishera | 95W or lower | | Zambezi | 95W or lower | | AM3 | Phenom II | 95W or lower | | Athlon II | Supports all speeds | | AM2 | Phenom | 95W or lower | | Athlon FX | Supports all speeds | | Athlon X2 | | Athlon | | Sempron | | AM2 | Athlon FX | Supports all speeds | | Athlon X2 | | Athlon | | Sempron | | 940 | Opteron | Supports all speeds | | Athlon FX | | 939 | Opteron | Supports all speeds | | Athlon FX | | Athlon X2 | | Athlon | | 754 | Athlon | Supports all speeds | | Sempron | |
|
 |
|
 |
|
|
| Dimensions | 116(L) x 112(W) x 60(H)mm | | Weight | 240g | | Base Material | Pure Aluminum | | Fan Size | 92mm | | Bearing Type | FSB (Fluid Sheild Bearing) | | Fan RPM | 2300rpm ±10% | | Fan Noise | 29dBA | |
| |
 |
 | The computer system may automatically shut down when booting the computer after the system monitoring program outputs a warning stating that the CPU fan is rotating slowly. In such a case, fully turn the Speed Control Knob in the clockwise direction before rebooting to disable the 'CPU Fan Detected' option in BIOS, or set the CPU fan's rotational speed to 1,350rpm or lower in the system monitoring program. | | | | Some motherboards fail to boot if the rotational speed of the CPU fan is below a certain rpm. However, booting can be possible even at low fan rpm if the BIOS settings are updated. For more information on updating the BIOS, please refer to the
website of the motherboard's manufacturer. There are motherboards which fail to detect the rpm while operating the cooler in Silent Mode, but this does not affect computing performance. | |  | Excessive force exerted on the fan may damage the fan, resulting in damage to the system. | |  | Zalman Tech Co., Ltd. is not responsible for any damages resulting from CPU Overclocking. |  | Liquid metal thermal grease unlike the normal thermal grease it contains electrical conductivity and causes aluminum cooler to rust therefore please avoid using it. Corrosion and short circuits caused by using aluminum cooler are users' responsibility, so please read this carefully before using. (EX: Liquid Pro, Liquid Ultra etcs) | |